Back to Products
UF-CN-15
Solar Connector
The PV connectors feature a rear-insert assembly method that makes installation easy, convenient, and safe. Made from superior resin material, they meet UL94-V0 fireproofing standards and are designed with anti-aging and ultraviolet resistance properties for long-term outdoor use.
Key Features
- Rear-insert assembly method
- Superior resin insulation material
- Pressure welding connection
- Seal ring waterproof design
- Copper tin-plated contacts
Technical Specifications
| Parameter | Measurement Value |
|---|---|
| Rated Voltage | 1500V DC |
| Protection Degree | IP68 (1m, 1h) |
| Safety Class | Class A |
| Contact Resistance | <= 0.3 mOhm |
| Cable Specification | 4.0 mm2 (OD 6.3 +/- 0.1 mm) |
| Ambient Temperature | -40C to +85C |
| Insulation Material | PC / PPE / PA |
| Flame Class | UL94-V0 |
| Contact Material | Copper tin plating |
| Connection Method | Pressure welding |
| Waterproof Structure | Seal ring |
Rated Voltage
1500V DC
Protection Degree
IP68 (1m, 1h)
Safety Class
Class A
Contact Resistance
<= 0.3 mOhm
Cable Specification
4.0 mm2 (OD 6.3 +/- 0.1 mm)
Ambient Temperature
-40C to +85C
Insulation Material
PC / PPE / PA
Flame Class
UL94-V0
Contact Material
Copper tin plating
Connection Method
Pressure welding
Waterproof Structure
Seal ring
How To Install
- 01.Strip the insulating layer of cable to L=7 +/- 0.3 mm and avoid cutting the wire core.
- 02.Place the stripped cable into the terminal hole and ensure all cores are inside the terminal hole.
- 03.Push the riveted pin into the insulator until it engages, then lightly pull the lead to check engagement.
- 04.Install the cable gland by hand first, then tighten with a plastic spanner or ring spanner. Recommended input torque is 3.0 N.m.
- 05.Insert male and female connectors until they engage, then pull lightly left and right to confirm assembly.
- 06.Unlock the connectors by hand when needed. Avoid excessive cable bending and follow the cable manufacturer's bending radius guidance.